archive-au.com » AU » I » IDEXX.COM.AU

Total: 283

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • SNAP Tetracycline Test - Dairy Testing
    C 36 46 F Tests can be kept at room temperature 18 29 C 64 84 F during the day of use Remove only the number of tests to be used for the day Do SNAP tests need to be brought to room temperature before testing No you do not need to warm the tests prior to use you can run the SNAP tests directly out of the refrigerator Do not open the foil pouch until you are ready to run the test Before you test Verify that the SNAP device has coloured spots in the results window and activation circle Make sure the pellet is moving freely in the bottom of the sample tube Be sure your heater block has been preheated to a temperature within the 45 C 5 C range What is the proper heater block temperature SNAP tests must be run at 45 C 5 C 104 122 F The SNAP portable heater blocks have internal thermostats optimised within the range of 40 50 C Allow 10 15 minutes for the portable heater to reach operating temperature If you do not see any colour in the block s temperature strip do not attempt to run the test Contact IDEXX Technical Services if you have any questions about heater performance Call 1 800 321 0207 or 1 207 556 4496 Monday Friday 08 00 to 17 00 ET fax 1 207 556 4630 or send an email Does the SNAP test need to remain on the heater block throughout the entire test Yes the SNAP test must remain on the heater block at 45 C 5 C for the duration of the test during the incubation time the activation time and the colour development time How critical is the activation time of the SNAP test Activation time is critical After the initial incubation pour the entire contents of the sample tube into the sample well of the SNAP device Remain with the device and watch the sample flow across the results window toward the blue activation circle When the blue activation circle begins to disappear press the activator firmly until the device snaps and the activator is flush with the body of the SNAP device Always activate snap the device when the edge of the circle nearest the sample begins to turn from dark blue to white Do not let the circle completely disappear SNAP technical tip When to SNAP SNAP test protocols Can I test more than one sample at a time The number of SNAP tests you can run at one time depends on the type of heater block you have With the pre set portable models that IDEXX offers you can accommodate two SNAP devices at one time If you are running multiple samples set up all samples and SNAP devices on the heater then set a timer for the incubation period After incubation individually pour the samples onto the sample well of each device Watch the devices carefully as each sample may flow

    Original URL path: http://www.idexx.com.au/html/en_au/dairy/tests/tetracycline.html (2014-01-05)
    Open archived version from archive

  • SNAP AFM1 Test - Dairy Testing
    use Remove only the number of tests to be used for the day Do SNAP tests need to be brought to room temperature before testing No you do not need to warm the tests prior to use you can run the SNAP tests directly out of the refrigerator Do not open the foil pouch until you are ready to run the test Before you test Verify that the SNAP device has coloured spots in the results window and activation circle Make sure the pellet is moving freely in the bottom of the sample tube Be sure your heater block has been preheated to a temperature within the 45 C 5 C range What is the proper heater block temperature SNAP tests must be run at 45 C 5 C 104 122 F The SNAP portable heater blocks have internal thermostats optimised within the range of 40 50 C Allow 10 15 minutes for the portable heater to reach operating temperature If you do not see any colour in the block s temperature strip do not attempt to run the test Contact IDEXX Technical Services if you have any questions about heater performance Call 1 800 321 0207 or 1 207 556 4496 Monday Friday 08 00 to 17 00 ET fax 1 207 556 4630 or send an email Does the SNAP test need to remain on the heater block throughout the entire test Yes the SNAP test must remain on the heater block at 45 C 5 C for the duration of the test during the incubation time the activation time and the colour development time How critical is the activation time of the SNAP test Activation time is critical After the initial incubation pour the entire contents of the sample tube into the sample well of the SNAP device Remain with the device and watch the sample flow across the results window toward the blue activation circle When the blue activation circle begins to disappear press the activator firmly until the device snaps and the activator is flush with the body of the SNAP device Always activate snap the device when the edge of the circle nearest the sample begins to turn from dark blue to white Do not let the circle completely disappear SNAP technical tip When to SNAP SNAP test protocols Can I test more than one sample at a time The number of SNAP tests you can run at one time depends on the type of heater block you have With the pre set portable models that IDEXX offers you can accommodate two SNAP devices at one time If you are running multiple samples set up all samples and SNAP devices on the heater then set a timer for the incubation period After incubation individually pour the samples onto the sample well of each device Watch the devices carefully as each sample may flow at a different rate Activate each device as the individual activation circles begin to disappear Snap the devices completely and set

    Original URL path: http://www.idexx.com.au/html/en_au/dairy/tests/afm1.html (2014-01-05)
    Open archived version from archive

  • SNAP Gentamicin Test - Dairy Testing
    only the number of tests to be used for the day Do SNAP tests need to be brought to room temperature before testing No you do not need to warm the tests prior to use you can run the SNAP tests directly out of the refrigerator Do not open the foil pouch until you are ready to run the test Before you test Verify that the SNAP device has coloured spots in the results window and activation circle Make sure the pellet is moving freely in the bottom of the sample tube Be sure your heater block has been preheated to a temperature within the 45 C 5 C range What is the proper heater block temperature SNAP tests must be run at 45 C 5 C 104 122 F The SNAP portable heater blocks have internal thermostats optimised within the range of 40 50 C Allow 10 15 minutes for the portable heater to reach operating temperature If you do not see any colour in the block s temperature strip do not attempt to run the test Contact IDEXX Technical Services if you have any questions about heater performance Call 1 800 321 0207 or 1 207 556 4496 Monday Friday 08 00 to 17 00 ET fax 1 207 556 4630 or send an email Does the SNAP test need to remain on the heater block throughout the entire test Yes the SNAP test must remain on the heater block at 45 C 5 C for the duration of the test during the incubation time the activation time and the colour development time How critical is the activation time of the SNAP test Activation time is critical After the initial incubation pour the entire contents of the sample tube into the sample well of the SNAP device Remain with the device and watch the sample flow across the results window toward the blue activation circle When the blue activation circle begins to disappear press the activator firmly until the device snaps and the activator is flush with the body of the SNAP device Always activate snap the device when the edge of the circle nearest the sample begins to turn from dark blue to white Do not let the circle completely disappear SNAP technical tip When to SNAP SNAP test protocols Can I test more than one sample at a time The number of SNAP tests you can run at one time depends on the type of heater block you have With the pre set portable models that IDEXX offers you can accommodate two SNAP devices at one time If you are running multiple samples set up all samples and SNAP devices on the heater then set a timer for the incubation period After incubation individually pour the samples onto the sample well of each device Watch the devices carefully as each sample may flow at a different rate Activate each device as the individual activation circles begin to disappear Snap the devices completely and set a timer

    Original URL path: http://www.idexx.com.au/html/en_au/dairy/tests/gentamicin.html (2014-01-05)
    Open archived version from archive

  • SNAP Sulphamethazine Test - Dairy Testing
    a SNAP test SNAP tests take less than 10 minutes to run Do SNAP tests need to be brought to room temperature before testing No you do not need to warm the tests prior to use you can run the SNAP tests directly out of the refrigerator Do not open the foil pouch until you are ready to run the test Before you test Verify that the SNAP device has coloured spots in the results window and activation circle Make sure the pellet is moving freely in the bottom of the sample tube Be sure your heater block has been preheated to a temperature within the 45 C 5 C range What is the proper heater block temperature SNAP tests must be run at 45 C 5 C 104 122 F The SNAP portable heater blocks have internal thermostats optimised within the range of 40 50 C Allow 10 15 minutes for the portable heater to reach operating temperature If you do not see any colour in the block s temperature strip do not attempt to run the test Contact IDEXX Technical Services if you have any questions about heater performance Call 1 800 321 0207 or 1 207 556 4496 Monday Friday 08 00 to 17 00 ET fax 1 207 556 4630 or send an email Does the SNAP test need to remain on the heater block throughout the entire test Yes the SNAP test must remain on the heater block at 45 C 5 C for the duration of the test during the incubation time the activation time and the colour development time How critical is the activation time of the SNAP test Activation time is critical After the initial incubation pour the entire contents of the sample tube into the sample well of the SNAP device Remain with the device and watch the sample flow across the results window toward the blue activation circle When the blue activation circle begins to disappear press the activator firmly until the device snaps and the activator is flush with the body of the SNAP device Always activate snap the device when the edge of the circle nearest the sample begins to turn from dark blue to white Do not let the circle completely disappear SNAP technical tip When to SNAP SNAP test protocols Can I test more than one sample at a time The number of SNAP tests you can run at one time depends on the type of heater block you have With the pre set portable models that IDEXX offers you can accommodate two SNAP devices at one time If you are running multiple samples set up all samples and SNAP devices on the heater then set a timer for the incubation period After incubation individually pour the samples onto the sample well of each device Watch the devices carefully as each sample may flow at a different rate Activate each device as the individual activation circles begin to disappear Snap the devices completely and set a

    Original URL path: http://www.idexx.com.au/html/en_au/dairy/tests/sulfamethazine.html (2014-01-05)
    Open archived version from archive

  • SNAP Melamine Test - Dairy Testing
    not open the foil pouch until you are ready to run the test Before you test Verify that the SNAP device has coloured spots in the results window and activation circle Make sure the pellet is moving freely in the bottom of the sample tube Be sure your heater block has been preheated to a temperature within the 45 C 5 C range What is the proper heater block temperature SNAP tests must be run at 45 C 5 C 104 122 F The SNAP portable heater blocks have internal thermostats optimised within the range of 40 50 C Allow 10 15 minutes for the portable heater to reach operating temperature If you do not see any colour in the block s temperature strip do not attempt to run the test Contact IDEXX Technical Services if you have any questions about heater performance Call 1 800 321 0207 or 1 207 556 4496 Monday Friday 08 00 to 17 00 ET fax 1 207 556 4630 or send an email Does the SNAP test need to remain on the heater block throughout the entire test Yes the SNAP test must remain on the heater block at 45 C 5 C for the duration of the test during the incubation time the activation time and the colour development time How critical is the activation time of the SNAP test Activation time is critical After the initial incubation pour the entire contents of the sample tube into the sample well of the SNAP device Remain with the device and watch the sample flow across the results window toward the blue activation circle When the blue activation circle begins to disappear press the activator firmly until the device snaps and the activator is flush with the body of the SNAP device Always activate snap the device when the edge of the circle nearest the sample begins to turn from dark blue to white Do not let the circle completely disappear SNAP technical tip When to SNAP SNAP test protocols Can I test more than one sample at a time The number of SNAP tests you can run at one time depends on the type of heater block you have With the pre set portable models that IDEXX offers you can accommodate two SNAP devices at one time If you are running multiple samples set up all samples and SNAP devices on the heater then set a timer for the incubation period After incubation individually pour the samples onto the sample well of each device Watch the devices carefully as each sample may flow at a different rate Activate each device as the individual activation circles begin to disappear Snap the devices completely and set a timer for the appropriate colour development time it varies by test after the last device has been activated When the time period is complete you can read the results Does IDEXX have a reader approved for NCIMS testing for SNAP tests Yes the SNAPshot DSR Reader is approved

    Original URL path: http://www.idexx.com.au/html/en_au/dairy/tests/melamine.html (2014-01-05)
    Open archived version from archive

  • Dairy Products Certificates of Analysis Request Form
    how to use SNAP products News IDEXX Dairy News Regulatory Updates Get the latest industry news regulatory updates and resources to keep you informed Home Dairy Testing Contact Us Contact IDEXX Dairy Customer Support Australia New Zealand Head Office IDEXX Laboratories Unit 20 38 46 South Street Rydalmere NSW 2116 Australia Tel AU 1300 44 33 99 Tel NZ 0800 102 084 Fax AU 1800 634 409 Fax NZ 0800

    Original URL path: http://www.idexx.com.au/html/en_au/dairy/certificates.html (2014-01-05)
    Open archived version from archive

  • IDEXX Dairy Resource Library - Dairy Testing
    use SNAP products News IDEXX Dairy News Regulatory Updates Get the latest industry news regulatory updates and resources to keep you informed Home Dairy Testing News Contact Us Contact IDEXX Dairy Customer Support Australia New Zealand Head Office IDEXX Laboratories Unit 20 38 46 South Street Rydalmere NSW 2116 Australia Tel AU 1300 44 33 99 Tel NZ 0800 102 084 Fax AU 1800 634 409 Fax NZ 0800 448

    Original URL path: http://www.idexx.com.au/html/en_au/dairy/news/resource-library.html (2014-01-05)
    Open archived version from archive

  • Put IDEXX to Work at Your Dairy
    that you need a partner who can provide you with the information materials and support you need wherever you do business Our proven solutions global distribution and manufacturing backed by expert technical service and international regulatory expertise help you provide safe wholesome food for consumers in a way that s profitable for you With residue detection and diagnostic tests we help you keep antibiotics out of the supply chain ensure the health of your herd and efficiently manage reproductive performance News and resources for your dairy National Dairy Herd Information Association The Dairy Practices Council The National Mastitis Council International Dairy Federation Test every tank for residues There s an IDEXX SNAP test for every key milk residue Make sure your milk is within safe residue limits and minimise the financial risk of shipping a hot load Learn more about IDEXX Dairy tests Manage reproductive performance Now it s easier to detect pregnancy With IDEXX pregnancy tests Your veterinarian can detect pregnancy from 28 days post breeding using routine blood samples Your milk laboratory can run pregnancy checks from 35 days postbreeding using milk samples you ve already submitted Improve herd health With the IDEXX SNAP BVDV Test it takes your vet just 10 minutes to ensure pregnant cows and replacements are free of persistent BVDV infection a leading cause of abortion still births and poor herd health In addition IDEXX offers a broad portfolio of lab based diagnostics tests for the management of infectious disease Learn to run an IDEXX SNAP test Training videos Step by step instructions Inside a SNAP test IDEXX offers two dozen laboratory tests for bovine disease including twelve that can be run on milk samples Find the Test You Need SNAP Beta Lactam ST Test SNAP MRL Test SNAP NBL Test SNAPduo Beta Tetra

    Original URL path: http://www.idexx.com.au/html/en_au/dairy/tests/farm-testing.html (2014-01-05)
    Open archived version from archive