archive-au.com » AU » F » FANTECH.COM.AU

Total: 253

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • GL Gamma EC Series - Variable Speed Fans - Fantech
    low profile GL Gamma EC Series is a simple plug and play system which means installers do not need to have specialised control programing knowledge They feature integrated infinitely variable speed control and eliminate the need for external VSDs current overloads and motor phase protection They are suited to ducted vertical exhaust applications include a removable windband that provides easy access for cleaning and maintenance and are available in 315 355 450 560 and 630mm fan sizes Kitchen Hood Exhaust Systems AS1668 1 1998 Clause 11 2 5 states that for commercial installations Kitchen Exhaust fan casings and cowls shall be manufactured from non combustible materials that have a fusing temperature above 1000oC Typical Applications Designed for use in commercial kitchen exhaust installations as well as applications requiring an all metal construction Ideal where the amount of air to be handled varies according to demand Features EC motor features reverse polarity protection locked rotor protection and soft start No additional protection such as contactors are required All motor sizes can be pre configured to suit specific sensors and specific applications and are supplied standard with 0 10V control input A full range of sensors are available including differential pressure humidity temperature air velocity and pollutant Can be run as an independent ventilation source or integrated into most building management systems Robust galvanised steel housing and cowl Quick release toggle clamps provide easy access for cleaning and maintenance Can be mounted at angles up to 30 EC motors can be directly connected to their appropriate AC supply Construction Cowls are of galvanised steel construction Impellers are backward curved centrifugal design and are of high performance composite material Bird mesh guards are an optional extra Powder coating is an optional extra Motors Type electronic commutated EC motor Electricity supply 200 277V single phase 50 60Hz for 315 to 450mm sizes 380 480V three phase 50 60Hz for 560 and 630mm sizes Bearings sealed for life ball Integrated EC Controller providing infinite speed control Maximum ambient temperature is 60 oC CDEC56VGL cannot exceed 16 8r s at 60 oC Internal Thermal Protection Integral thermal overload protection is supplied as standard Testing Air flow tests to ISO 5801 2007 Noise tests to ISO 3744 2010 Special Note Backdraft dampers are an optional extra The pressure loss across the damper has to be added to the system pressure before making selections All GL Gamma EC models can be pre configured to suit specific sensors and specific applications Please advise Fantech of these parameters at the time of order Single Phase Models Product Code Diameter mm Speed rps kW Amps Avg dB A 3m Max Pressure Pa Recom Max Volume m 3 sec CEEC31VGL 20 315 7 0 37 1 65 21 18 0 12 CEEC31VGL 40 315 13 0 37 1 65 38 66 0 25 CEEC31VGL 60 315 20 0 37 1 65 48 161 0 35 CEEC31VGL 80 315 27 0 37 1 65 55 297 0 48 CEEC31VGL 100 315 34 0

    Original URL path: http://www.fantech.com.au/FanRange.aspx?EnergyEff=Y&RangeID=209 (2015-10-07)
    Open archived version from archive


  • TD Ecowatt Series - Mixed-Flow Fans - Fantech
    EC Series Gamma EC Series GL Gamma EC Series Ecowatt Series Gamma EC Supply Gamma Downflow TD Ecowatt Series Mixed Flow Fans Features The TD EcoWatt range of mixed flow fans incorporates the latest innovative EC motor technology Suitable for mounting in any position the range is available to suit standard duct sizes from 100 to 315mm diameter Typical Applications Ideal for the ventilation of toilets laundries ensuites and kitchens for homes hotels and commercial premises Features An energy efficient solution with state of the art EC motor technology Speed controllable from 10 to 100 via a 0 10V analogue input signal High performance mixed flow impeller Fans can be removed for maintenance or repair without disturbing the duct system via specially designed support brackets All models are designed for direct connection to standard diameter circular ducting Integral mounting foot makes installation more simple Includes plug and lead for easy and quick installation Suitable for both supply and exhaust air applications EC motors can be directly connected to their appropriate AC supply Construction Models 250 100 to 800 200 casings manufactured from reinforced injection moulded polypropylene plastic Impellers are made of injection moulded plastic and are a mixed flow design Models 1300 250 and 2000 315 casings manufactured from epoxy coated steel Impellers are made of aluminium and of mixed flow design Motors Type high performance energy efficient brushless DC motor Electricity supply 90 260V 50 60Hz for models 250 100 to 800 200 230V 50 60Hz for models 1300 250 and 2000 315 Bearings sealed for life ball Motor protection IP44 Internal Thermal Protection Manual reset thermal overload protection device in accordance with mandatory requirements for in line fans AS NZS60335 2 80 2004 Testing Air flow to ISO5801 Part 1 1997 or AMCA 210 99 Noise to ISO

    Original URL path: http://www.fantech.com.au/FanRange.aspx?EnergyEff=Y&RangeID=224 (2015-10-07)
    Open archived version from archive

  • Short Case EC Series - Axial Fans - Fantech
    and provide real time feedback to the fan The fan s on board microprocessor adjusts the motor speed and therefore modulates the ventilation rate to match the specific requirements of the area The Short Case Axial EC fans feature fully integrated infinitely variable speed control which eliminates the need for external VSDs current overloads and motor phase protection They are a simple plug and play system which means installers do not need to have specialised control programing knowledge They are available in 7 sizes ranging from 250 to 630mm diameter Typical Applications Exhausting or supplying air to applications handling clean ambient air Also where automatic air modulation is required Features EC motor features reverse polarity protection locked rotor protection and soft starting No additional protection such as contactors are required All models supplied standard with 0 10V control input Diameter sizes 500mm and above can be pre configured to suit specific sensors and specific parameters A full range of sensors are available including differential pressure temperature air velocity and pollutant Can be run as an independent ventilation source or integrated into most building management systems Compact short case design with light weight but robust construction Low noise high performance impellers with enhanced aerodynamic design An electric junction box is fitted as standard Capable of operating at temperatures up to 60 C Units can be mounted at any angle EC motors can be directly connected to their appropriate AC supply Construction The casing is of galvanised steel with a polyester epoxy finish as standard Impellers are of high performance composite material Motors Type electronic commutated EC motor Electricity supply 200 277V single phase 50 60Hz or 380 480V three phase 50 60Hz Bearings sealed for life ball Integrated EC Controller providing infinite speed control Internal Thermal Protection Automatic reset protection is supplied as standard Testing Air flow tests to BS848 Part 1 1980 Noise tests to BS848 Part 2 1985 Wiring Diagram Scan the QR code on page B 31 or visit www fantech com au to view wiring diagrams online Special Note Diameter sizes from 500mm and above can be programed to suit specific sensors and specific parameters Please advise Fantech of these parameters at the time of order Single Phase Models Product Code Diameter mm Speed rps kW Amps Avg dB A 3m Max Pressure Pa Recom Max Volume m 3 sec SCEEC25 20 250 11 0 23 1 65 20 11 0 12 SCEEC25 50 250 27 0 23 1 65 44 60 0 30 SCEEC25 80 250 42 0 23 1 65 55 155 0 48 SCEEC25 100 250 50 0 23 1 65 61 208 0 62 SCEEC35 20 350 5 0 45 2 4 20 4 0 19 SCEEC35 50 350 16 0 45 2 4 41 48 0 56 SCEEC35 80 350 26 0 45 2 4 52 138 0 92 SCEEC35 100 350 32 0 45 2 4 57 223 1 20 SCEEC40 20 400 5 0 42 2 2 20 5 0

    Original URL path: http://www.fantech.com.au/FanRange.aspx?EnergyEff=Y&RangeID=151 (2015-10-07)
    Open archived version from archive

  • Compact 2000 EC Series - Square Plate Axial Fans - Fantech
    s on board electronics This processes the data and in turn adjusts the motor speed This modulates the ventilation rate to match the specific requirements of the area The Compact 2000 EC Series is a simple plug and play system which means installers do not need to have specialised control programming knowledge The series is available in 4 sizes ranging from 250 to 630mm diameter Typical Applications Suitable for general ventilation applications in commercial and light industrial environment such as warehouses substations and indoor recreation centres Features EC motor features reverse polarity protection locked rotor protection and soft start No additional protection such as current overloads are required All models supplied standard with 0 10V control input Diameter sizes 500mm and above can be pre programmed to suit specific sensors and specific applications A full range of sensors are available including differential pressure humidity temperature air velocity and pollutant Can be run as an independent ventilation source or integrated into most building management systems Robust galvanised steel construction with polyester epoxy finish Low noise high performance impellers with enhanced aerodynamic design Guard is incorporated as standard Units are light weight and can be mounted at any angle EC motors can be directly connected to their appropriate AC supply Capable of operating at temperatures up to 70ºC Construction The square plate is manufactured from galvanised steel with a high quality polyester epoxy finish as standard Impellers are of high performance composite material Motors Type electronic commutated EC motor Electricity supply 200 277V single phase 50 60Hz or 380 480V three phase 50 60Hz Bearings sealed for life ball Integrated EC Controller providing infinite speed control IP44 rating Internal Thermal Protection Integral thermal overload protection is supplied as standard Testing Air flow tests to ISO5801 2007 Noise tests to BS848 Part 2

    Original URL path: http://www.fantech.com.au/FanRange.aspx?EnergyEff=Y&RangeID=111 (2015-10-07)
    Open archived version from archive

  • Gamma EC Supply Series - Variable Speed Fans - Fantech
    technology and are most efficient where conditions vary during the course of the day Matching sensors monitor the ambient conditions in a space and provide real time feedback to the fan The fan s on board microprocessor adjusts the speed and therefore modulates the ventilation rate to match the specific requirements of the area The Gamma EC Supply Series is a simple plug and play system which means installers do not need to have specialised control programing knowledge They feature integrated infinitely variable speed control and eliminate the need for external VSDs current overloads and motor phase protection They are fitted with bird mesh which eliminates the risk of objects entering building or interrupting motor operation and are available in 315 355 450 560 and 630mm fan sizes Typical Applications Ideal for supplying fresh air to an air handling unit or to an air conditioning system Also suitable where make up air or positive pressure is required in the ventilated space Features EC motor features reverse polarity protection locked rotor protection and soft start No additional protection such as contactors are required All motor sizes can be pre configured to suit specific sensors and specific applications and are supplied standard with 0 10V control input A full range of sensors are available including differential pressure humidity temperature air velocity and pollutant Can be run as an independent ventilation source or integrated into most building management systems Corrosion proof robust construction High performance backward curved centrifugal impellers fitted Can be mounted at angles up to 30 EC motors can be directly connected to their appropriate AC supply Construction Cowls are of UV stabilised plastic Steel components have a corrosion resistant finish Impellers are backward curved centrifugal design and are of high performance composite material Bird mesh guards are fitted as standard Shutters cannot be fitted Motors Type electronic commutated EC motor Electricity supply 200 277V single phase 50 60Hz for 315 to 450mm sizes 380 480V three phase 50 60Hz for 560 and 630mm sizes Bearings sealed for life ball Integrated EC Controller providing infinite speed control Internal Thermal Protection Integral thermal overload protection is supplied as standard Testing Air flow tests to ISO 5801 2007 Noise tests to ISO 3744 2010 Special Note All Gamma EC supply models can be pre configured to suit specific sensors and specific applications Please advise Fantech of these parameters at the time of order Single Phase Models Product Code Diameter mm Speed rps kW Amps Avg dB A 3m Max Pressure Pa Recom Max Volume m 3 sec CEEC31S 20 315 7 0 37 1 65 19 14 0 11 CEEC31S 40 315 13 0 37 1 65 35 66 0 23 CEEC31S 60 315 20 0 37 1 65 45 162 0 35 CEEC31S 80 315 27 0 37 1 65 52 283 0 47 CEEC31S 100 315 34 0 37 1 65 57 478 0 58 CEEC35S 20 355 5 0 35 1 8 23 16 0 15 CEEC35S 40 355 11

    Original URL path: http://www.fantech.com.au/FanRange.aspx?EnergyEff=Y&RangeID=2016 (2015-10-07)
    Open archived version from archive

  • Gamma EC Series - Downflow Discharge Centrifugal Fans - Fantech
    ventilation rate to match the specific requirements of the area The Gamma EC Series is a simple plug and play system which means installers do not need to have specialised control programing knowledge They feature integrated infinitely variable speed control and eliminate the need for external VSDs current overloads and motor phase protection Models come in downflow or vertical discharge configurations and are available in 250 315 355 450 560 and 630mm fan sizes Typical Applications Exhausts air from a wide range of commercial applications such as factories warehouses and workshops gymnasiums bulk goods retail outlets and assembly halls Features EC motor features reverse polarity protection locked rotor protection and soft start No additional protection such as contactors are required All models supplied standard with 0 10V control input Diameter sizes 315mm and above can be pre configured to suit specific sensors and specific applications A full range of sensors are available including differential pressure humidity temperature air velocity and pollutant Can be run as an independent ventilation source or integrated into most building management systems Robust and lightweight construction Compact low profile design Designed for downflow or vertical exhaust applications Can be mounted at angles up to 30 Supply air units are available see pages D 36 38 EC motors can be directly connected to their appropriate AC supply selection data Construction Cowls are UV stabilised plastic Impellers are backward curved centrifugal design and are of high performance composite material Steel components have a corrosion resistant finish Bird mesh guards are fitted as standard Motors Type electronic commutated EC motor Electricity supply 200 277V single phase 50 60Hz for 250 to 450mm sizes 380 480V three phase 50 60Hz for 560 and 630mm sizes Bearings sealed for life ball Integrated EC Controller providing infinite speed control Internal Thermal Protection Integral thermal overload protection is supplied as standard Testing Air flow tests to ISO 5801 2007 Noise tests to ISO 3744 2010 Special Note Diameter sizes from 315mm and above can be pre configured to suit specific sensors and specific applications Please advise Fantech of these parameters at the time of order Single Phase Models Product Code Diameter mm Speed rps kW Amps Avg dB A 3m Max Pressure Pa Recom Max Volume m 3 sec CEEC25D 20 250 11 0 23 1 65 0 24 0 10 CEEC25D 40 250 22 0 23 1 65 0 103 0 18 CEEC25D 60 250 33 0 23 1 65 52 223 0 28 CEEC25D 80 250 44 0 23 1 65 58 375 0 38 CEEC25D 100 250 55 0 23 1 65 60 528 0 44 CEEC31D 20 315 7 0 37 1 65 0 18 0 15 CEEC31D 40 315 13 0 37 1 65 43 70 0 30 CEEC31D 60 315 20 0 37 1 65 48 156 0 46 CEEC31D 80 315 27 0 37 1 65 56 286 0 65 CEEC31D 100 315 34 0 37 1 65 61 447 0 78 CEEC35D 20 355 5

    Original URL path: http://www.fantech.com.au/FanRange.aspx?EnergyEff=Y&RangeID=2017 (2015-10-07)
    Open archived version from archive

  • EC Controller - Ancillaries - Fantech
    Inst Maint Instructions Do s and Don ts Design Installation Downloads Tech Talk Latest Issues Brochures Brochure Download Catalogue Catalogue Download Selection Program Selection Program Download Revit Models Revit Models Download Contact Us Contact Addresses Australia New Zealand Asia Europe Africa Via Email Australia New Zealand Asia Europe Africa Requests enquiries Requests enquiries Key Projects Projects Commercial Retail Domestic Education Culture Fire Safety Hazardous Catering and Hospitality Industrial Medical Hospital

    Original URL path: http://www.fantech.com.au/AncilCategory.aspx?Group=CT&EC%20Controller (2015-10-07)
    Open archived version from archive

  • EC Sensors - Ancillaries - Fantech
    Installation Downloads Tech Talk Latest Issues Brochures Brochure Download Catalogue Catalogue Download Selection Program Selection Program Download Revit Models Revit Models Download Contact Us Contact Addresses Australia New Zealand Asia Europe Africa Via Email Australia New Zealand Asia Europe Africa Requests enquiries Requests enquiries Key Projects Projects Commercial Retail Domestic Education Culture Fire Safety Hazardous Catering and Hospitality Industrial Medical Hospital Sports Leisure Mining About Us About Fantech About Fantech

    Original URL path: http://www.fantech.com.au/AncilCategory.aspx?Group=SR&EC%20Sensors (2015-10-07)
    Open archived version from archive